RM3 compounds (R =rare earth metals,M =transition metals) have rarely been studied for gaseous hydrogen storage applicat......

The effects of Cr, Al and B addition on the microstructure and high-temperature oxidation behaviors (at 1200, 1250 and 1......

镁锂合金耐蚀性差是制约其广泛应用的关键问题.本文在总结大量镁锂合金腐蚀行为研究的基础上,阐述镁锂合金腐蚀行为的影响因素和提......

Thermoelectric properties of orthorhombic or rhombohedral GeSe have attracted great attention recently,with the rise of ......

Titanium diboride was deposited on the surface of nickel coated copper electrode by electro sparking. The performances o......

Tungsten(W)is one of the significant candidate for plasma-facing materials(PFM)in the next generation of fusion reactors......

Process of adding yttrium into the melt is not a common method for ODS RAFM steel production.In this paper,the oxide dis......

The factors affecting dimensional accuracy and precision of retention of lathe body castings are material rigidity,resid......

To make high integrity lightweight metal castings,best practices have to follow in various stages of casting and heat tr......

采用机械活化/热压烧结法制备了名义成分为MoSi2-xAlCr2(x为摩尔含量)的准二元系系列试验合 金，利用X射线衍射仪分析测试了试验合金......

在45#钢基体上以TH-2激光合金化专用粉进行激光合金化处理，通过扫描电镜动态原位观察裂纹从基体向激光合金化区(LAZ)扩展的过程，研究......

Whereas hollow composites present some superiorities like abundant micro interfaces,outstanding impedance matching as th......

当演员组微观结构和 Al-4Cu-1.5Mg 合金的机械性质上的次要的钪和锆联合 alloying 的影响试验性地被调查了。试验性的结果看那钪和......

Aluminum matrix composites reinforced with mechanical alloying particles(SiC_p) were fabricated by the semisolid stirrin......

To improve the mechanical properties and wear resistance of ZA27 alloy, Si was introduced to the alloy, and the effect o......

Coupled with hot-continuous rolling technology and based on the calculation of the finishing rolling impact work in the ......

A molecular dynamics (MD) simulation study has been performed for the solidification processes of two binary liquid allo......

The mechanical and corrosion performance of low alloy steel tubular goods depends on the microstructure obtained as a re......

This paper introduces the research and development of high strength A517Q developed by Baosteel for platform rack,with m......

ULCB steels have a great potential for structural as well as automotive applications due to the lean alloying concept an......

The hit ratio of the yield strength of HRB400 D reinforced bar(Tangshan Iron and Steel Co.) is low. In this study, the e......

The finishing rolling elongationδof the alloying non-quenched and tempered steel is calculated with the covalent electr......

The evolutions of microstructure of Fe0.85Ni0.15 products, which were prepared by mechanical alloying (MA) with and with......

The powders of pure Al, Fe, and Zr for preparing Al78Fe20Zr2 were subject to a high-energy planetary ball milling.The mi......

Microstructure evolution of C-Si-Mn-Nb,C-Si-Mn-Cr-Nb and C-Si-Mn-Cr-Mo-Nb tested steels during step-cooling process were......

An as-cast bainite ductile iron with excellent mechanical properties and wear resistance was fabricated by alloying and ......

Nb and Sn are major alloying elements in Zr alloys.In this study,the microstructure,mechanical properties,corrosion beha......

The thermodynamic stabilities, electronic structures, and mechanical properties of the Pd-based superalloys are studied ......

At present, all hydrogen storage alloys are poisoned by hydrogen mixed with CO, CO2, etc, which decreases the hydrogen s......

The Mo surface modified layer on titanium was obtained by the plasma surface alloying technique. The structure and compo......

The microstructure and mechanical properties of 1Cr18Ni9Ti,FeCrAl andCr15Ni20Si2 alloys after injection of oxide partic......

The homogeneous dispersive Y_2O_3 particles were melt-doped on the surface of a superalloy by laser alloying and the ef......

Investigation was made of the ductility and microstructure of a series of cast Ni_3Al-base al-loys,with 19—23 at.-% Al......

The thermal stability of amorphous ternary hydrides Mg_(50)Ni_(50)H_(54) and Mg_(30)Ni_(70)H_(45) and their corre-spond......

1.IntroductionThe research of the TD1 and TD2 al-loys based on intermetallic compound Ti_3Al,which possesses high tempe......

The effect of alloying element such as Mo,Si or B and its stoichoimetric composition on thetensile properties at room a......

The valence electron structures of alloying cementite θ-(Fe, M)3C and ε-(Fe, M)3C and those of the biphase interfaces ......

The electronic properties of zinc-blende B_xGa_(1-x)N alloys are comparatively investigated by employing both the Perdew......

Amorphous Al_(80)Fe_(20) powder which can hardly be obtained using conventional rapid quenchingtechnique was directly p......

A series of multi-component M1-based hydrogen storage alloys with a cobalt atomic ratio of 0.40-0.75 were prepared. The ......

Several kinds of special alloys are produced on the surfaces of iron and steels by using double glow surface alloying te......

In order to improve the wear resistance of titanium alloy Ti6Al4V and high temperature oxidation resistance of intermeta......

The mechanical alloying technique was used to make multi phase alloys V+ TiFe 0.85 Mn 0.15 . Their hydrogen ......

In recent years, mechanical alloying (MA) of immiscible alloy systems characterized by positive heat of mixing has been......

Blended elemental powders with the nominal compositions (mole fraction, %) of Ti 54 Al 46 , Ti 52 Al 48 ......

The Mg-Al-Zn series AZ31 and AZ31+MM alloys are homogenized at 673, 723 and 753K respectively. The hardness of alloy ing......

Positron lifetime spectra have been measured in binary Ni Al alloys with different chemical composition and NiAl alloys......

The systematic chemical compositions including common C, Si, Mn, Al, and micro-alloying elements of Ti and Nb were desig......

The Mo 5Si 3 base alloys with a series of transition metal elements were prepared by arc melting, and were annealed a......

Tempering is an important phenomenon in ferrous alloys. Most steels, especially alloying steels, are used after quenchin......